Skip to content
Stud & Spool
STUD
&
SPOOL
Stud & Spool
Shop
Light
Dark
Auto
Cart
Loading
Loading
Sort by
Latest Arrivals
Price: Low -> High
Price: High -> Low
3D prints
3D prints | Stud & Spool
FIG. 4 — Grid Desk Organiser, plan and front elevation: 90 mm wide, 60 mm deep, 35 mm tall. Three bays on a 10 mm square grid base.
Engineering-style drawing of the desk organiser: a base marked with a 10 mm square grid and three printed compartments, shown from above and from the front. Dimension lines show 90 mm wide, 60 mm deep and 35 mm tall.
FIG. 4
GRID DESK ORGANISER · PLAN + FRONT ELEVATION
A
BAY
20 MM
3 BAYS
PLA
GRID 10 MM
PLAN
FRONT
60 mm
35 mm
90 mm
FIG. 5 — Gear Fidget Spinner, plan and right side view: 62 mm wide, 57 mm deep, 8 mm thick. Six meshing gears.
Engineering-style drawing of six equal 12-tooth gears in a ring, each meshing with its two neighbours, with a thin right side view. Dimension lines show 62 mm wide, 57 mm deep and 8 mm thick.
FIG. 5
GEAR FIDGET SPINNER · PLAN + RIGHT SIDE
A
GEAR,
12 TEETH
57 mm
62 mm
8 mm
SIDE
6 GEARS
FIG. 6 — Desk Cable Organiser, plan and front elevation: 80 mm wide, 40 mm deep, 25 mm tall. Four slots, 10 mm wide.
Engineering-style drawing of the cable holder: a block with four open-topped U-shaped slots, shown from above and from the front. Dimension lines show 80 mm wide, 40 mm deep and 25 mm tall.
FIG. 6
DESK CABLE ORGANISER · PLAN + FRONT ELEVATION
A
SLOT
10 MM
4 SLOTS
PLA
PLAN
FRONT
40 mm
25 mm
80 mm
3D prints
Desk Cable Organiser
3D prints
Grid Desk Organiser
S$12.00
By Vince & Maeve
90 mm
3 bays
PLA
90 × 60 × 35 mm
3D prints
Gear Fidget Spinner
S$9.00
By Vince & Maeve
6 gears
PLA
62 × 57 × 8 mm
S$8.00
By Vince & Maeve
4 slots
PLA
80 × 40 × 25 mm